Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

© Unique Industrial Products Supplier. All Rights Reserved (Terms of Use)  

TEL: +(91)-(44)-25389458/ 25394599/ 25381467  FAX:+(91)-(44)-25396954  Email: uniqman_99@yahoo.com ; uipspl@gmail.com

 Website powered by webLaL.com for UIPS

TOOLKITS

toolkits chennai 1

Supplied in a five drawer professional roller cabinet and a three drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes.

Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor.

Drawer loads should be evenly distributed.

3 Drawer Top Chest

Top compartment size: 89 x 661 x 150mm.

Drawer sizes: 1@ 51 x 591 x 282.5mm,

2@ 102 x 591 x 282.5mm.

5 Drawer Roller Cabinet

Internal drawer dimensions:

4@ 591 x 460 x 102mm.

1@ 591 x 410 x 204mm.

Contents:

• Set of 25 HSS drills 1 - 13.00mm x 0.5mm.

• Eight piece 200mm (8”) double cut Engineer's file set.

• Six piece 16cm cut 2 assorted needle file set.

• 20x 150mm (6”) junior hacksaw blades.

• 10x 12” x 1/2” x 18TPI HSS all hard hacksaw blade.

• 25x 230mm x 280mm assorted abrasive sheets.

• 200mm (8”) soft grip phosphate adjustable wrench.

• 6mm 150mm flat cold chisel.

• 3” 18-bade metric/inch comb feeler gauge set.

• 4” x 3/16” (4.8mm) square head centre punch.

• Set of 6 parallel pin punches.

• 150mm/6” inch/metric rigid rustless rule.

• 300mm/12” rigid rustless rule - round end.

• 150mm (6”) Engineer’s square.

• 300mm (12”) Engineer’s square.

• 7” double ended engineers scriber.

• 11/4” focal length eye loupe.

• Adjustable telescopic 11/4” mirror.

• Set of two: 1/16” - 1/4” and 1/4” - 3/4” tap wrenches.

• 1lb ball pein hammer - wood shaft.

• 16oz black rubber mallet - wood shaft.

• 51/2” plastic handle household scissors.

• 81/2” plastic handle household scissors.

• 5m/16” professional ABS steel tape.

• Snap-off 8 seg-blade heavy duty knife.

• Snap-off 13 seg-blade mini knife.

• Retractable trimming knife c/w five blades.

• Beaver style junior hacksaw.

• Professional ‘plus’ cushion grip hacksaw.

• Magnetic pick-up tool.

• Set of four Pro-Torq pliers.

• 10” curved jaw grip wrench.

• 12 piece Pro-Torq screwdriver set.

• 64 piece 1/4” hexagon bit set.

1/4” hex bit driver.

• Seven piece box spanner set 6 - 19mm

c/w tommy bars.

• Combination wrenches: 10 - 19mm.

• 50 piece metric 3/8” square drive socket set.

• 8” straight blade tinsnip.

• Three drawer professional tool chest.

• Metal tote tray.

• Five drawer professional roller cabinet.

• Eight piece metric Pro-Torq hex wrench set on clip.

• Nine piece inch Pro-Torq hex wrench set on clip.

• 19mm x 33m black PVC insulation tape.

300 Piece Engineer’s

Professional Tool Kit

toolkits chennai 2

208 Piece Apprentice Engineer’s

Tool Kit- AET200

Supplied in a five drawer professional roller cabinet and a three drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes.

Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor.

Drawer loads should be evenly distributed.

3 Drawer Top Chest

Top compartment size: 89 x 661 x 150mm.

Drawer sizes: 1@ 51 x 591 x 282.5mm,

2@ 102 x 591 x 282.5mm.

5 Drawer Roller Cabinet

Internal drawer dimensions:

4@ 591 x 460 x 102mm.

1@ 591 x 410 x 204mm.

Contents:

• Set of 25 HSS drills 1 - 13.00mm x 0.5mm.

• Eight piece 200mm (8”) double cut Engineer's file set.

• Six piece 16cm cut 2 assorted needle file set.

• 20x 150mm (6”) junior hacksaw blades.

• 10x 12” x 1/2” x 18TPI HSS all hard hacksaw blade.

• 25x 230mm x 280mm assorted abrasive sheets.

• 200mm (8”) soft grip phosphate adjustable wrench.

• 6mm 150mm flat cold chisel.

• 3” 18-bade metric/inch comb feeler gauge set.

• 4” x 3/16” (4.8mm) square head centre punch.

• Set of 6 parallel pin punches.

• 150mm/6” inch/metric rigid rustless rule.

• 300mm/12” rigid rustless rule - round end.

• 150mm (6”) Engineer’s square.

• 300mm (12”) Engineer’s square.

• 7” double ended engineers scriber.

• 11/4” focal length eye loupe.

• Adjustable telescopic 11/4” mirror.

• Set of two: 1/16” - 1/4” and 1/4” - 3/4” tap wrenches.

• 1lb ball pein hammer - wood shaft.

• 16oz black rubber mallet - wood shaft.

• 51/2” plastic handle household scissors.

• 81/2” plastic handle household scissors.

• 5m/16” professional ABS steel tape.

• Snap-off 8 seg-blade heavy duty knife.

• Snap-off 13 seg-blade mini knife.

• Retractable trimming knife c/w five blades.

• Beaver style junior hacksaw.

• Professional ‘plus’ cushion grip hacksaw.

• Magnetic pick-up tool.

• Set of four Pro-Torq pliers.

• 10” curved jaw grip wrench.

• 12 piece Pro-Torq screwdriver set.

• 64 piece 1/4” hexagon bit set.

1/4” hex bit driver.

• Seven piece box spanner set 6 - 19mm

c/w tommy bars.

• Combination wrenches: 10 - 19mm.

• 50 piece metric 3/8” square drive socket set.

• 8” straight blade tinsnip.

• Three drawer professional tool chest.

• Metal tote tray.

• Five drawer professional roller cabinet.

• Eight piece metric Pro-Torq hex wrench set on clip.

• Nine piece inch Pro-Torq hex wrench set on clip.

toolkits chennai 3

62 Pieces Workshop Tool Kit

5 compartment cantilever tool box with specially moulded trays to facilitate enhanced Tool Control and padlock hole for additional

security.

• Sockets: 8 - 32mm, M10 and M14 spark plug

• 250mm Sliding ‘T’ Handle

• 125mm & 250mm extensions, 75mm wobble extension

• Quick release 72T rubber hatchet handle

• 375mm/15” jointed knurl gripped swivel handle

• Universal joint

• Combination Spanners: 6 -22mm

• Pro-torq screwdrivers: 5.5x100mm,

6.5x150mm and 8x200mm flat,

No 0, No 2 and No 3 cross point.

• Pro-torq pliers: 180mm/7” combination,

150mm/6” snipe nose and

165mm/6½" diagonal.

• Metric L-wrench ball

driver set – 1.5 - 10mm

toolkits chennai 4

56 Pieces Standard Service Tool Kit

Suitable for use by service engineers, electricians and tradesmen. All Kennedy industrial quality tools carry a quality guarantee.

Contents:

• 430 x 340 x 160mm ABS plastic, aluminium reinforced, tool case.

• 150mm chrome adjustable wrench.

• 19mm x 33m black PVC insulation tape.

• 150mm mains tester range 125/250V.

• Soldering iron 25W/240V.

• Desoldering gun.

• 17g 1.0mm diameter 60/40 cored solder.

• 115mm sharp nose precision tweezers.

• 30mm diameter inspection mirror (handle extends up to 480mm).

• 7.5m/25ft steel tape.

• 13 segment-blade mini autolock retract knife.

• Junior hacksaw frame and blade.

• Magnetic pick up tool (extends to 550mm).

• 160mm snipe nose plier.

• 160mm diagonal cutting nipper.

• 160mm engineer's combination plier with side cutter.

• 150mm insulation and wire stripping plier.

• 115mm precision nippers.

• 115mm precision end cutting nippers.

• Chrome vanadium blade screwdrivers: crosspoint No.0, 1 and 2pt;

slotted 6mm; supadriv No.0, 1 and 2pt.

• Offset screwdrivers: 5mm slot x No.1pt, 6mm slot x No.2pt.

• Insulated screwdrivers: parallel 4 x 100mm 1000V VDU,

slotted 2.5 x 85mm.

• 20mm sash tool.

• 11 piece screwdriver and tool set:

parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm; crosspoint PHO-2,

PHO and PH1; fine point awl and tweezers.

• 9 piece hex key set 1.5 - 10mm.

• Chrome vanadium combination spanners:

5.5, 6, 7, 8, 9 and 10mm.

toolkits chennai 5

Contents

• Aluminium tool case.

• Six piece 16cm needle file set.

• 150mm adjustable wrench.

• Digital multimeter.

• 125/250V mains tester.

• 19mm x 33m insulation tape:

black, red and green/yellow

PVC.

• 25W soldering iron.

• Cable stripping knife.

• Desoldering gun.

• 60/40 cored solder.

• Butane soldering torch.

• Centre punch 2.4 x 3.2mm.

• 2x parallel pin punches.

• 150mm/6” flexible rustless

rule.

• Machinist’s scriber.

• Sharp nose tweezers.

• Flat blade tweezers.

• Eye loupe.


• Telescopic inspection mirror.

• Magnetic pick up tool (extends

to 550mm).

• 225g (1/2lb) ball pein hammer.

• 31/2 oz cross pein hammer.

• 7.5m/25ft steel tape.

• Aluminium pocket torch.

• Retractable knife.

• Auto return utility knife.

• Junior hacksaw and blade.

• 10 junior hacksaw blades.

• 150mm flat nose plier.

• 150mm insulation and wire

stripping plier.

• 150mm wire crimper/stripper.

• 160mm snipe nose plier.

• 160mm diagonal cutting nipper.

• 160mm combination plier.

• 4 piece circlip plier set.

• 177mm locking plier.

• 115mm precision flat nose

plier.

• 115mm precision long nose

plier.


• 115mm precision nippers.

• 115mm precision end cutting

plier.

• 165mm soft touch pliers.

• Pro-Torq grip screwdrivers with

chrome vanadium blade: slotted

100 x 6mm; crosspoint 76mm

x No.0 and No.1, 6mm x No.2;

supadriv 76mm x No.0

and 1, 4” x No.2; electrician’s

parallel 150 and 200 x 5mm.

• Offset screwdrivers: 5mm x

No.1, 6mm x No. 2.

• Insulated screwdrivers: parallel

4 x 100mm, 1000V VDU,

slotted 5.5 x 125mm.

• Torx screwdrivers: T6, T8 and

T10.

• 11 piece screwdriver and tool

set.


• Nine piece 5.5 - 13mm

combination spanner set.

• Seven piece electronic

screwdriver set.

• Six piece 0 - 11 BA open ended

spanner set.

• Multi-purpose snips.

• Seven piece metric hexagon key

set.

• Multi-purpose oil.

• 20mm sash tool.

• 100 cable ties.

• Scissors.

Number Weight Order Code

of Pieces each KEN-595

122 14.0kg


This superb kit contains all the necessary tools for the service engineer in a sturdy aluminium case partitioned to keep tools

organized and readily accessible.

122 Piece ‘Deluxe’ Service Engineer’s Tool Kit

toolkits chennai 6

102 Piece

Service Engineer’s Tool Kit

Contents

• Hi-impact mobile tool case.

• Six piece 16cm cut 2 needle file

set.

• 150mm chrome finish

adjustable wrench.

• 150mm mains tester range

125/250V.

• 19mm x 33m insulation tape:

black, red and green/yellow pvc.

• Soldering iron 25W 240V.

• Desoldering gun.

• Cable stripping knife.

• 17g 1.0mm diameter 60/40

cored solder.

• Square head centre punch 3.2 x

100mm.

• 150mm/6” flexible rustless rule.

• Precision tweezers: 115mm

sharp nose, 120mm flat blade.

• Eye loupe.

• 30mm dia. telescopic inspection

mirror (handle expands to

480mm).

• 225g (1/2lb) ball pein hammer.

• 7.5m/25' steel tape. • 13

segment blade mini autolock

retractable knife.

• Junior hacksaw frame c/w

hardened blade.

• 10 junior hacksaw blades for

metal.

• 215mm plastic handle scissors.

• Magnetic pick up tool.

• 160mm snipe nose plier.

• 160mm diagonal cutting nipper.

• 160mm combination plier with

side cutter.

• 150mm insulation and wire

stripping plier.

• 115mm precision flat nose

pliers.

• 115mm precision long nose

pliers.

• 115mm precision nippers.

• 115mm precision end cutting

nippers.

• Pro-Torq grip screwdrivers with

chrome vanadium blade: slotted

100 x 6mm;

crosspoint 76mm x No.0 and

No.1, 6mm x No.2; supadriv

76mm x No.0 and No.1,

100mm x No.2; electrician's:

parallel 150 and 200 x 5mm.

• Offset screwdrivers:

5mm x No.1 and 6mm x No. 2.

• 1000V VDU insulated

screwdrivers: parallel

4 x 100mm; slotted 5.5 x

125mm.

• Torx screwdrivers: T6, T8 and

T10.

• 11 piece screwdriver

and tool set: parallel 1, 1.2,

1.4, 1.8, 2.4 and 3mm;

crosspoint PHO-2, PHO and

PH1, fine point awl and

tweezers.

• Seven piece electronic

screwdriver set:

parallel 1.4, 2, 2.4

and 3mm; crosspoint

PHO-3, PHO-2 and PH0.

• Six piece chrome vanadium

steel 0 - 11 BA open ended

spanner set.

• 20mm dia. sash tool.

• Nine piece hex key set

1.5 - 10mm.

• Chrome vanadium combination

spanners: 5.5, 6, 7, 8, 9 and

10mm.